R6_Race2_WH 2012+ Yamaha R6 FTecu Race Team Package 2 Advanced With Hardware

£733.52

This system is for use with OEM Yamaha PN 13S-8591A-H0 or 13S-8591A-F0
This system was developed in response to ECU restrictions placed on the highest levels of American Road-Racing in 2014.
This system has powered the machines of champions and is designed to compete with systems like Motec and Marelli..

Description

This FTecu system is for use with OEM Yamaha PN 13S-8591A-H0 or 13S-8591A-F0 
This system was developed by FTecu in response to ECU restrictions placed on the highest levels of American Road-Racing in 2014.
This system has powered the machines of champions and is designed to compete with systems like Motec and Marelli.

  • With this system your Stock ECU becomes far more powerful than a factory YEC racing ECUs while maintaining YEC wiring harness compatibility.
  • Our traction control (TC) system utilizes advanced ignition timing control strategies to offer superior feel when compared to piggyback (TC) systems.
  • Using advanced flashing technology, updates can be performed in 20 seconds compared to traditional flashing which can take over 6 minutes.
  • Includes software notes written by the developers describing how to best utilize the many maps and features.

This System Includes all of the following RaceTeam2 Features

  • TC threshold map adjustment (TPS vs Gear) with switchable Map Mode 1/2
  • TC window limit adjustment for TPS, Gear, and RPM
  • Ramping QuickShifter hold time adjustment (ms) per gear
  • Ramping QuickShifter TC inhibit delay (ms)
  • Ramping QuickShifter window limit adjustment for minimum RPM
  • Ramping QuickShifter sensor trigger voltage and NC/NO adjustment
  • Ramping Rev-Limiter gear specific RPM Limits
  • Ramping Rev-Limiter activation kill percent by gear
  • Ramping Rev-Limiter activation ignition retard by gear
  • Pit-Road Speed Limit (MPH for all Gears)
  • Pit-Road activation kill percent
  • Pit- Road gearing correction
  • Selectable Firing order for EU stock or US stock/YEC kit harness configurations
  • Selectable tip-over sensor input channel for use with data streams

This System Includes all of the following Standard ECU Flashing Features

  • High Resolution Fuel Mapping (TPS vs RPM) by cylinder
  • High Resolution Fuel Mapping (MAP vs RPM) by cylinder
  • Fuel acceleration enrichment adjustments
  • Injector proportioning adjustments
  • Ignition timing adjustment per gear
  • Ignition idle trim adjustment
  • Variable intake stack control
  • Throttle-By-Wire base map adjustment per gear
  • Throttle-By-Wire decel compensation per gear

Optional Hardware Included

  • FT-Datalink ECU Flashing interface (includes ECU license to which race-team package will be assigned§Race Team Data Jumper (relocates Tip-Over signal to allow for data streams).
  • Race Team Specific Bike Side harness for quick track-side adjustments.

Optional AiM Data Integration NOT Included

For use with Evo4, Evo5, SoloDL, and MXL2 data systems.

  • Engine RPM
  • Throttle Input and Throttle Opening
  • Traction Control Target
  • Traction Control Derivative
  • Calculated Gear Postion
  • Water and Air Temp
  • Battery Voltage
  • Map Switch Position
  • TC Switch Position
  • Shifter State
  • Traction Control State
  • Rev Limiter State
  • Tip-Over Switch State

With FlashTune from FTecu there is no need for third party fueling devices like Bazzaz or PowerCommander on your R6 Ftecu Race team licence is a comparable system to Motec and Marelli

  • WE NOW SHIP ACTIVATION LICENCES AS SOON AS YOU PURCHASE