Flash-Tune 6P_FTDL_02 FTdataLink ECU Remap & flashing interface cables eliminate the need for the following plug in devices and gives you YEC race kit like performance and features.
– Power Commander or other piggy back fuel controllers
– Power Commander Secondary Fuel Module
– Power Commander Ignition Module
– Bazzaz ZFTi
– Two Brothers JuiceBox
– Leo Vince Fast II fuel and ignition box
ECU flashing is not only more cost effective than its alternatives but it is superior because but it also allows for more precise tuning fuel maps which automatically compensate for changing atmospheric conditions it allows for modification of parameters that are not otherwise tunable such a throttle valve actuation and engine braking
The Flash-Tune Remap Interface allows you to easily adjust the following!
 09-11 R1 – 14B-8591A-00(EU) StockECU.ftm
 09-11 R1 – 14B-8591A-20(US) StockECU.ftm
 09-11 R1 – 14B-8591A-30(CAN) StockECU.ftm
 ECU Mapping
 Fuel
 TPS vs RPM
 MAP vs RPM
 Accel Enrichment
 Inj. Timing
 Inj. Proportioning
 Ignition
 IGN Advance
 Volt-Dwell
 Idle Speed
 Warmup/Base Idle
 SAP idle comp
 Throttle-by-wire
 ETV BaseMaps
 ETV Decel Comp
 ECU Settings
 Rev Limiters
 Fan Temps
 YCCI Variable Stacks
 Disable INJ decel cut
 Disable AIS Valve
 Default to A-Mode
 Disable Steering Damper
 Disable O2 Sensor
 Disable TOS Sensor
 Extend Warmup Idle
 ECU Modules
 Speedometer
 Quickshifter
 PC Fuel Import
 12-14 R1 – 1KB-8591A-00(EU) StockECU.ftm
 12-14 R1 – 1KB-8591A-20(US) StockECU.ftm
 12-14 R1 – 45B-8591A-10(JP) StockECU.ftm
 ECU Mapping
 Fuel
 TPS vs RPM
 MAP vs RPM
 Accel Enrichment
 Inj. Timing
 Inj. Proportioning
 Ignition
 IGN Advance
 Volt-Dwell
 Idle Speed
 Warmup/Base Idle
 SAP idle comp
 Throttle-by-wire
 ETV BaseMaps
 ETV Decel Comp
 ECU Settings
 Rev Limiters
 Fan Temps
 YCCI Variable Stacks
 Disable INJ decel cut
 Disable AIS Valve
 Default to A-Mode
 Disable O2 Sensor
 Disable Steering Damper
 Disable TOS Sensor
 Extend Warmup Idle
 Disable EXUP Valve
 ECU Modules
 Speedometer
 Quickshifter
 PC Fuel Import
This Data-Link ECU Flashing Kit Includes:
FTdataLink ECU Interface USB Cable
Bike-side programming harness to permanently install on your bike
FT ECU License to allow unlimited flashes for a single ecu
Flash-Tune FTdataLink ECU Remap & flashing interface cables eliminate the need for the following plug in devices and gives you YEC race kit like performance and features.
– Power Commander or other piggy back fuel controllers
– Power Commander Secondary Fuel Module
– Power Commander Ignition Module
– Bazzaz ZFTi
– Two Brothers JuiceBox
– Leo Vince Fast II fuel and ignition box
ECU flashing is not only more cost effective than its alternatives but it is superior because but it also allows for more precise tuning fuel maps which automatically compensate for changing atmospheric conditions it allows for modification of parameters that are not otherwise tunable such a throttle valve actuation and engine brakingEveryone deserves the same tuning technology that until now was reserved for factory teams and riders with their YEC race kits. With Flash-Tune you can remove the restrictions that the factory must put in place to meet strict street vehicle emissions regulations for homologation, without the need for the factory race loom and factory YEC ECU.
By using Flash-Tune to remap your ECU you are able to remap and tune your bike without interfering with critical correction factors resulting in smoother power gains than ever before possible.
Flash-Tune Remap Products are under constant development. This product is for RACE USE ONLY and may invalidate your warranty.
The included software will automatically update when connected to the internet as new features are added!
Prices for UK customers - VAT is applied at checkout, After Brexit all EU countries should have no Import duty BUT VAT and local taxes may be requested by customs in your country. We guarantee to beat any price. Dismiss